To start you will need to purchase the Base unit. The Base unit comes with a power supply (transformer), cables, and T-parts to get you started. You can add more spots or bollards (up to 5 per power supply) at any time. The maximum system length should not exceed 35 meters. After you have installed them you can connect the light points to your app as you would normally do.
Note: The section from the power socket to the first connector is 3.5 meters in total. In every base unit you will also receive a 5 meter extension cable so you can plan your first light point at 8.5 meters from the power socket. The provided extension cable for our Low Voltage products is 5 meters long.