Philips Hue tap switch

세계 최초의 무선 지능형 스위치로 Philips Hue 조명을 제어하며, 사용자의 터치를 통해 전력이 공급됩니다.

  • 즐겨 사용하는 Philips Hue 장면 불러오기
  • 어디든 설치 가능
  • 배터리 없이 터치로 전원 켜기

  • 스마트 컨트롤

  • 집 밖에서 제어

  • 조명 예약

  • 안락한 조광

  • 분위기 조성

  • 기상 및 취침

  • 웰빙

  • 조명에 색깔 입히기

  • 음악과 맞추기

  • 영화와 맞추기

Philips Hue를 처음 접하시나요?

Hue tap은 Philips Hue 무선 조명 시스템에 추가할 수 있는 액세서리입니다. Philips Hue bridge에 연결하여 스마트 기기를 사용하지 않고도 Philips Hue 조명을 제어할 수 있습니다.

시스템을 확장하는 방법  

언제든지 Philips Hue의 구성 요소를 늘릴 수 있습니다. Philips Hue 시스템을 설치하면, Philips Hue 조명과 조명기구, 스위치 및 기타 액세서리 등을 50개까지 추가할 수 있습니다. 전원을 켠 후 Philips Hue 앱을 통해 시스템에 추가하기만 하면 됩니다. 앱에서 새 제품이 검색되면, 이름을 지정하여 새 장면이나 기존 장면에 추가할 수 있습니다. Philips Hue를 최대한 즐겨 보세요.

기능
Philips Hue tap switch

즐겨 사용하는 Philips Hue 장면 불러오기

즐겨 사용하는 Philips Hue 조명 설정 4가지를 Philips Hue tap switch에 사전 설정할 수 있습니다. 직접 만든 장면 및 Philips가 사용자를 위해 만든 장면 중 한 개를 선택하거나, 모든 조명의 전원을 끄도록 버튼을 조정합니다. 선택은 사용자에게 달려 있습니다.

어디든 설치 가능

Philips Hue tap switch는 일반 벽 스위치로 사용할 수 있습니다. 나사를 사용하거나 접착 테이프를 스위치의 뒷면에 붙여서 원하는 곳 어디에나 놓을 수 있습니다.

리모컨으로 사용

리모컨으로 편리하게 Philips Hue tap switch를 사용할 수도 있습니다.

배터리 없이 터치로 전원 켜기

Philips Hue tap은 운동 에너지를 사용하므로 사용자의 터치를 통해 전력을 공급받습니다. 따라서 배터리가 필요 없습니다.

사양
Philips Hue tap switch

Philips Hue tap switch

브리지당 Philips Hue tap switch 최대 25개(시스템에 다른 스위치가 없을 경우)
배터리 없이 작동
지그비 저전력 프로토콜, IEEE 802.15.4
주파수 대역 2400 ~ 2483.5MHz
범위: 현지 환경에 따라 15 ~ 30m
무게: 90g
직경 75mm, 높이 25mm
구성 가능한 버튼 수 4
작동 수명 50,000회
단독 사용 또는 벽면 장착
환경

작동 온도: 0°C ~ 40°C
작동 습도: 0% < 습도 < 80%
(응결이 없어야 함)
보증

2년

환경

작동 온도: 0°C ~ 40°C

작동 습도: 0% < 습도 < 80%

(응결이 없어야 함)

보증

2년

다운로드
Philips Hue tap switch

User Manual Hue Tap Switch

다운로드가 User Manual Hue Tap Switch

FAQ

How can I add/connect the tap to my hue system?

Date published 2016-04-07 - Last edited 2016-07-20

Go to the hue app setting menu and select "switch setup" and folow onscreen instructions.

Did this answer your question?

Thank you very much for your feedback. We are happy this helped you.
We are sorry this did not help you. Please have a look at our other support page.

What should I do if my tap is not responding?

Date published 2016-04-07 - Last edited 2016-07-20

Probably one of the buttons was pressed for a long time causing the tap to disconnect from the hue system. You can easily reconnect the system without losing your settings. Go to the Hue app settings menu and select "Switch setup". Press "+" and follow the onscreen instructions. The tap is re-connected again. If not please reach out to our customer support for help.

Did this answer your question?

Thank you very much for your feedback. We are happy this helped you.
We are sorry this did not help you. Please have a look at our other support page.

How many Philips Hue taps and/or Philips Hue dimmer switches can I connect to the Philips Hue system?

Date published 2016-04-01 - Last edited 2016-07-20

"You can connect 7 Hue dimmer switches (HDS) OR 25 Hue taps (HT) OR a combination.

Combination list:
1 HDS - 21 HT.
2 HDS - 18 HT.
3 HDS - 15 HT.
4 HDS - 12 HT.
5 HDS - 8 HT.
6 HDS - 5 HT.
7 HDS - 2 HT."

Did this answer your question?

Thank you very much for your feedback. We are happy this helped you.
We are sorry this did not help you. Please have a look at our other support page.

Can I check if a tap command is received by the Bridge?

Date published 2016-04-07 - Last edited 2016-07-20

Yes, you can. Go to "Settings" and select "Switch setup". Select the tap you want to check. Press a button on the tap and the related tap symbole will light up in your screen as a confirmation that the tap command is received by the Bridge.

Did this answer your question?

Thank you very much for your feedback. We are happy this helped you.
We are sorry this did not help you. Please have a look at our other support page.

How does it work?

Date published 2016-04-01 - Last edited 2016-07-20

There is a kinetic, energy-harvesting system within Philips Hue tap switch. The sensor detects pressure on its buttons and harvests the energy needed in order to connect to the bulbs, using ZigBee technology. Philips Hue tap switch needs no batteries or a mains power source; it is operated purely on kinetic energy. This means Philips Hue tap switch has a remarkable zero watts of power consumption, making it smarter, greener, with no battery waste and is hassle-free.

Did this answer your question?

Thank you very much for your feedback. We are happy this helped you.
We are sorry this did not help you. Please have a look at our other support page.

How does Philips Hue tap switch fix to your wall?

Date published 2016-04-01 - Last edited 2016-07-20

The mounting plate of Philips Hue tap switch can be fixed to any wall using the adhesive power strips (included), which are removable from the wall and leave no trace. Alternatively, the back plate can be mounted on a wall using screws.

Did this answer your question?

Thank you very much for your feedback. We are happy this helped you.
We are sorry this did not help you. Please have a look at our other support page.

Can I own more than one Philips Hue tap switch? Can they work together?

Date published 2016-04-01 - Last edited 2016-07-20

Yes, you can operate up to 24 Philips Hue tap switches with each bridge when no other wireless switches are connected. This has no impact on the number of bulbs which can be used, which means you can still have up to 50 lamps on top of these switches. The beauty of the Philips Hue family is that all members of the Philips Hue family are designed to work together. Once you have the Philips Hue bridge, your connected lighting experience is completely scalable - you’ll be able to add any Philips Hue-enabled product to your home setup.

Did this answer your question?

Thank you very much for your feedback. We are happy this helped you.
We are sorry this did not help you. Please have a look at our other support page.